RedMax EDG2300R OP9 OP10 OP11, Adjustment Of Idling Speed, SECURELY OP10,11, Operation, English

OP9 (1)

OP10

OP11

English

7. Operation

■ADJUSTMENT OF IDLING SPEED

•The engine idling speed is preadjusted at the factory so that the engine keeps running without moving the drill when releasing the throttle lever to the idling position. However, due to changes in engine conditions, it may be necessary to adjust the idling.

•To increase idling, screw idle adjustment screw in, until preferred speed is obtained. To decrease idling, unscrew idle adjustment screw until preferred speed is obtained.

(1) Idle adjustment screw

■WHEN INSTALL OR LOOSEN THE CHUCK MORE

SECURELY (OP10,11)

•Set a 19mm spanner between gearcase and drill chuck to lock drive shaft. Turn on lock lever first, then hit the mounted chuck handle with a hammer to screw in (clockwise) or screw out (counterclockwise) the chuck.

•Use chuck mount wrench in place of chuck handle and tighten or untighten manually instead of hitting. Do not hit the chuck mount wrench.

(1)19mm spanner

(2)Lock lever

30