Reebok Fitness RBTL19981 HOW to USE the Fitness Test Program, Select the Fitness Test program

7	Adjust the cushion level of the walking platform
	if desired.

See step 7 on page 13.

8Follow your progress with the LED displays.

See step 8 on page 13.

9Whenkey. you are finished exercising, remove the

Make sure that the incline of the treadmill is at the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the stor- age position or the treadmill will be damaged.

Remove the key from the console and put it in a secure place. In addition, move the on/off switch to the off position and unplug the power cord.

HOW TO USE THE FITNESS TEST PROGRAM

The FITNESS TEST program is designed to estimate the relative fitness level you have achieved. For the best results, the FITNESS TEST program should be used at a time when your energy level is high; the pro- gram should not be used if you have already exercised during the day.

The FITNESS TEST program consists of up to seven 4- minute periods and is followed by a 2-minute cool-down period. The speed and/or incline of the treadmill will au- tomatically increase at the beginning of each 4-minute period. When your heart rate reaches 70% of your max- imum possible heart rate, the FITNESS TEST will end. After the 2-minute cool-down period, the console will display your estimated fitness level.

To use the program, follow the steps below.

1Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

2Select user 1, 2, or 3.

See step 2 on page 13.

3Enter your age into the console.

To use the FITNESS TEST program, you must enter your age. If you have not entered this infor- mation, see HOW TO ENTER USER INFORMA- TION on page 12.

4Put on the heart rate monitor.

The heart rate monitor must be worn when the FIT- NESS TEST program is used. (See HOW TO USE THE HEART RATE MONITOR on page 7.) Note: The FITNESS TEST program can be started with- out a heart rate reading; however, the program will automatically stop if your heart rate is not detected 4 minutes after the program is started.

5Select the FITNESS TEST program.

	When the key is inserted,
	the MANUAL mode will
	be selected. To select
	the FITNESS TEST pro-
	gram, press the MODE
	button repeatedly until
	the pulse program 3 indicator lights.
6	Press the START button or the SPEED + button
	to start the program.
	When the START button is pressed, the TIME dis-
	play will begin
	counting up
	and the LED
	matrix will
	show ÒLVL 1Ó
	(level 1), indi-
	cating that the
	first 4-minute
	period of the
	FITNESS
	TEST program has begun. The walking belt will
	begin to move at 1.5 mph and the incline of the
	treadmill will automatically adjust to 3%. Hold the
	handrails and carefully begin walking.

When the first 4-minute period of the FITNESS TEST program is completed, the LED matrix will show ÒLVL 2,Ó indicating that the second 4-minute period has begun. The speed of the treadmill will then increase to 2.5 mph and the incline will in- crease to 4%.

When the second 4-minute period is completed, the LED matrix will show ÒLVL 3.Ó The speed will then increase to 3.3 mph; the incline will remain the same. At the beginning of each 4-minute pe- riod, the speed and/or incline of the treadmill will automatically increase. The program will continue until your heart rate reaches 70% of your maximum possible heart rate and the current 4-minute period ends. The program will then be completed, regard- less of how many 4-minute periods remain.

17