Regency E21-NG3, E21-LP3 LOG SET Installation, 27-23 27-30 27-27 27-24 27-28 27-25, 27-26

INSTALLATION

LOG SET INSTALLATION

Read the instructions below carefully and refer to the images. Dangerous operating conditions may occur if the logs are not positioned in their correct locations. If the logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation.

Log kit (Part # 533-930) contains the following pieces:

a)27-23 Back Center Log

b)	27-24	Middle Center Log
c)	27-25	Middle Right Log
d)	27-26	Front Right Log
e)	27-27	Center Front Log
f)	27-28	Middle Left Log
g)	27-29	Front Left Log

h)27-30 Back Right Log

i)	902-156	Embers Lava
j)	902-153	Rock Wool
k)	902-179	Vermiculite

l)946-669 Platinum Embers (supplied with packaged manual)

27-23

27-30

27-27

27-24

27-28

27-25

27-29 27-26

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Spread vermiculite around the fi rebox base. Then take some embers and spread them over the vermiculite as shown.

3)Fit log 27-23 into the pins on the back log tray.

27-23

4)Fit log 27-24 into the pins on the middle right hand side of the burner.

27-24

27-24

14 Regency® E21-3 Gas Fireplace Insert