Regency S2100M, F2100M installation manual Safety Label, 2002, 2001

SAFETY LABEL

This is a copy of the label that accompanies each Regency Small Freestanding Woodstove (F1100S). It is located in the upper right corner

of the back of the stove. We have printed a copy of the contents here for your review.

NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.

LISTED SPACE HEATER, SOLID FUEL TYPE, ALSO	DO NOT REMOVE THIS LABEL
SUITABLE FOR MOBILE HOME INSTALLATION	100
MODEL: REGENCY SMALL FREESTANDING STOVE - F1100S

TESTED TO: CSA B366.2 / ULC S627 / UL 1482 REPORT NO.6621 (MAY 1993)

		INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND
		OPERATING INSTRUCTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS
		AND INSTALLATION INSPECTION IN YOUR AREA. USE 150 MM (6 IN.) DIAMETER MINIMUM 24 MSG
		BLACK OR 26 MSG BLUED STEEL CONNECTOR WITH LISTED FACTORY-BUILT CHIMNEY SUITABLE FOR
		USE WITH SOLID FUELS OR MASONRY CHIMNEY.
		SEE LOCAL BUILDING CODE AND MANUFACTURER'S INSTRUCTIONS FOR PRECAUTIONS REQUIRED
F1100S WITH	F1100S WITHOUT	FOR PASSING A CHIMNEY THROUGH A COMBUSTIBLE WALL OR CEILING. DO NOT PASS CHIMNEY
		CONNECTOR THROUGH COMBUSTIBLE WALL OR CEILING. DO NOT CONNECT THIS UNIT TO A
AIRMATE SHIELD	AIRMATE SHIELD
		CHIMNEY FLUE SERVING ANOTHER APPLIANCE.	BACKWALL

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

SIDEWALL

B

E

F1100S WITH AIRMATE SHIELD

F1100S WITHOUT AIRMATE SHIELD

A

MEASURE

FLUE

MEASURE

FLUE

D

FROM

HEATER

CENTER-LINE

FROM

HEATER

CENTER-LINE

RESIDENTIAL INSTALLATION USING

RESIDENTIAL INSTALLATION USING

BACKWALL

SINGLE WALL CONNECTOR

SINGLE WALL CONNECTOR

SIDEWALL

SIDEWALL

SIDEWALL

A 330 mm / 13 in

D 635 mm / 25

in

SIDEWALL

A 380 mm /15

in

D 685

mm / 27

in

G

G

H

J

BACKWALL

B 280 mm / 11 in

E 445 mm / 17.5in

BACKWALL

B 265 mm / 10.5in

E 430

mm / 17

in

CORNER

C 205 mm / 8

in

F 510 mm / 20

in

CORNER

C 280 mm / 11

in

F 585

mm / 23

in

INSTALLATION USING LISTED DOUBLE WALL

INSTALLATION USING LISTED DOUBLE WALL

CONNECTOR - MOBILE HOME

CONNECTOR - MOBILE HOME

I

SIDEWALL

A 280 mm / 11 in

D 585

mm / 23

in

SIDEWALL

A 330 mm / 13 in

D 635

mm / 25 in

BACKWALL

B 150 mm / 6

in

E 320

mm / 12.5in

BACKWALL

B 125 mm / 5

in

E 290

mm / 11.5in

ADJACENT WALL

CORNER

C 150 mm / 6

in

F 460

mm / 18

in

CORNER

C 230 mm / 9

in

F 535

mm / 21

in

SIDEWALL

F

SIDEWALL

A 230 mm / 9

in

D 535

mm / 21

in

SIDEWALL

A 345 mm / 13.5in

D 650

mm / 25.5in

INSTALLATION USING LISTED DOUBLE WALL

C

INSTALLATION USING LISTED DOUBLE WALL

CONNECTOR - RESIDENTIAL CLOSE CLEARANCE

CONNECTOR - RESIDENTIAL CLOSE CLEARANCE

BACKWALL

B 125 mm / 5

in

E 290

mm / 11.5in

BACKWALL

B 125 mm / 5

in

E 290

mm / 11.5in

CORNER

C 75

mm / 3

in

F 380

mm / 15

in

CORNER

C 125 mm / 5

in

F 430

mm / 17

in

BACK M

FLOOR

INSTALLATION USING LISTED DOUBLE WALL

INSTALLATION USING LISTED DOUBLE WALL

L

PROTECTION*

CONNECTOR - ALCOVE

CONNECTOR - ALCOVE

SIDE

SIDE

SIDEWALL

mm / 23

in

SIDEWALL

mm / 25

in

K 405 mm / 16 in

G 280 mm / 11 in

I 585

G 330 mm / 13 in

I 635

BACKWALL

H 180 mm / 7

in

J 345

mm / 13.5in

BACKWALL

H 125 mm / 5

in

J 290

mm / 11.5in

L 150 mm / 6 in

M

150 mm / 6 in

K

FRONT

MINIMUM ALCOVE CEILING HEIGHT: 2.15 M / 7 FT	MAXIMUM ALCOVE DEPTH 915 MM / 36 IN.	* In Canada, floor protection must
MINIMUM CLEARANCES FOR HORIZONTAL CONNECTOR TO CEILING: 455 MM / 18"		extend 18" to the front and 8" to
		each side of the stove.
THE SPACE BENEATH THE HEATER MUST NOT BE OBSTRUCTED. OPERATE ONLY WITH FIREBRICKS IN PLACE.

FOR USE WITH SOLID WOOD FUEL ONLY. USE OF OTHER FUELS MAY DAMAGE HEATER AND CREATE A HAZARDOUS CONDITION. DO NOT OBSTRUCT COMBUSTION AIR OPENINGS. OPERATE ONLY WITH FIREBRICKS IN PLACE. OPERATE ONLY WITH DOOR CLOSED - OPEN FEED DOOR TO FEED FIRE ONLY. DO NOT USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. DO NOT OVERFIRE - IF HEATER OR CHIMNEY CONNECTOR GLOWS YOU ARE OVERFIRING. INSPECT AND CLEAN CHIMNEY AND CONNECTOR FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE CREOSOTE BUILDUP MAY OCCUR RAPIDLY. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL AWAY FROM HEATER. REPLACE GLASS ONLY WITH NEOCERAM GLASS. COMBUSTIBLE FLOOR MUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING BENEATH THE HEATER AND TO THE FRONT AND SIDES AS INDICATED OR TO THE NEAREST PERMITTED COMBUSTIBLE MATERIAL.

OPTIONAL COMPONENT: FAN, ELECTRICAL RATING: VOLTS 115, 60 HZ, 2 AMPS

COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATION: OUTSIDE AIR KIT AND ONE OF THE FOLLOWING DOUBLE WALL CONNECTOR

IN CANADA: LISTED SECURITY MODEL DP, OR OLIVER MACLEOD PRO-VENT PV DOUBLE WALLED CONNECTOR WITH LISTED CHIMNEY SYSTEM: SECURITY MODEL S2100, ICC EXCEL 2100 .

IN USA: LISTED DOUBLE WALL CONNECTORS SECURITY MODEL DP, SELKIRK MODEL DS, OLIVER MACLEOD PRO VENT PV, SIMPSON DURA VENT MODEL DVL, GSW SUPER PIPE 6, METAL-FAB DOUBLE WALL. CONNECTED TO ONE OF THE FOLLOWING COMPATIBLE CHIMNEY SYSTEMS SECURITY MODEL S2100 OR MODEL ASHT, SELKIRK MODEL SSII, OLIVER MACLEOD PRO JET 3103, SIMPSON DURA PLUS, GSW MODEL SC OR METAL- FAB TEMP/GUARD, AMERI-TEC HS, ICC EXCEL 2100 . USE CHIMNEY COMPONENTS AS SPECIFIED IN INSTALLATION INSTRUCTIONS.

	MANUFACTURED BY: FIREPLACE PRODUCTS INTERNATIONAL LTD.
	6988 VENTURE ST.
	DELTA, BC V4G 1H4
	MADE IN CANADA
UNITED STATES ENVIRONMENTAL	CERTIFIED TO COMPLY WITH JULY 1990,
PROTECTION AGENCY	PARTICULATE EMISSION STANDARDS.

CAUTION

HOT WHILE IN OPERATION DO NOT TOUCH. KEEP CHILDREN,
	CLOTHING AND FURNITUREAWAY. CONTACT MAY CAUSE
		SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS.	WD
908-281			01/03

JAN FEB MAR APR MAY JUN JUL AUG SEPT OCT NOV DEC

MANUFACTURE	2002
	2003
DATE OF	2001

4 Regency Freestanding Woodstove