Regency F2100M, S2100M installation manual Do not Remove this Label DEC, Nov, Sept, Mar, Feb, Jan

SAFETY LABEL

This is a copy of the label that accompanies each Regency Medium Freestanding Step Woodstove (S2100M). It is located in the upper right corner

of the back of the stove. We have printed a copy of the contents here for your review.

NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.

107

LISTED SPACE HEATER, SOLID FUEL TYPE, ALSO

DO NOT REMOVE THIS LABEL

DEC

SUITABLE FOR MOBILE HOME INSTALLATION

107

MODEL: REGENCY MEDIUM FREESTANDING STEP STOVE - S2100M

TESTED TO:

CSA B366.2 / ULC S627 / UL 1482

REPORT NO.6622 (FEB.1993)

NOV

INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND OPERATING INSTRUCTIONS.

CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA. USE

150 MM (6 IN.) DIAMETER MINIMUM 24 MSG BLACK OR 26 MSG BLUED STEEL CONNECTOR WITH LISTED FACTORY-BUILT

OCT

CHIMNEY SUITABLE FOR USE WITH SOLID FUELS OR MASONRY CHIMNEY.

S2100M

SEE LOCAL BUILDING CODE AND MANUFACTURER'S INSTRUCTIONS FOR PRECAUTIONS REQUIRED FOR PASSING A CHIMNEY

THROUGH A COMBUSTIBLE WALL OR CEILING. DO NOT PASS CHIMNEY CONNECTOR THROUGH COMBUSTIBLE WALL OR

SEPT

CEILING. DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

S2100MINIMUMCLEARANCESTOCOMBUSTIBLEMATERIALS

BACKWALL

FLOOR PROTECTION*

MEASURE

FLUE

SIDEWALL

SIDE

SIDE

* In Canada, floor protec-

AUG

FROM

HEATER

CENTER-LINE

B

E

BACK

M

K

405 mm / 16 in

RESIDENTIAL INSTALLATION USING SINGLE WALL CONNECTOR

A

L

L

150 mm / 6

in

SIDEWALL

A 355 mm / 14 in

D

660 mm / 26

in

M 150 mm / 6

in

BACKWALL

B 255 mm / 10 in

E

420 mm / 16.5 in

D

CORNER

C 150 mm / 6 in

F

445 mm / 17.5 in

tion must extend 18" to

K FRONT

JUNJUL

INSTALLATION USING LISTED DOUBLE WALL CONNECTOR - MOBILE HOME

BACKWALL

the front and 8" to each

SIDEWALL

SIDEWALL

side of the stove.

SIDEWALL

A 405 mm / 16 in

D

725 mm / 28.5 in

H

J

MAXIMUM ALCOVE DEPTH:

BACKWALL

B 215 mm / 8.5 in

E

395 mm / 15.5 in

MINIMUM ALCOVE CEILING HEIGHT:

CORNER

C 190 mm / 7.5 in

F

510 mm / 20

in

2.15 M / 7 FT

G

G

INSTALLATION USING LISTED DOUBLE WALL CONNECTOR -

RESIDENTIAL CLOSE CLEARANCE

I

915 MM / 36 IN.

SIDEWALL

A 255 mm / 10 in

D

550 mm / 22.5 in

BACKWALL

B 115 mm / 4.5 in

E

290 mm / 11.5 in

ADJACENT WALL

MINIMUM CLEARANCES FOR HORIZONTAL

MAYAPR

CORNER

C 190 mm / 7.5 in

F

510 mm / 20

in

SIDEWALL

C

WITH FIREBRICKS IN PLACE.

CONNECTOR TO CEILING:

INSTALLATION USING LISTED DOUBLE WALL CONNECTOR - ALCOVE

455 MM / 18"

SIDEWALL

G 255 mm / 10 in

I

570 mm / 22.5 in

F

THE SPACE BENEATH THE HEATER MUST

BACKWALL

H 115 mm / 4.5 in

J

290 mm / 11.5 in

NOT BE OBSTRUCTED. OPERATE ONLY

FOR USE WITH SOLID WOOD FUEL ONLY. USE OF OTHER FUELS MAY DAMAGE HEATER AND CREATE A HAZARDOUS CONDITION. DO NOT OBSTRUCT

MAR

COMBUSTIONAIROPENINGS. OPERATEONLYWITHFIREBRICKSINPLACE. OPERATEONLYWITHDOORCLOSED-OPENFEEDDOORTOFEEDFIREONLY.

DO NOT USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. DO NOT OVERFIRE - IF HEATER OR CHIMNEY CONNECTOR GLOWS YOU

AREOVERFIRING. INSPECTANDCLEANCHIMNEYANDCONNECTORFREQUENTLY. UNDERCERTAINCONDITIONSOFUSECREOSOTEBUILDUPMAYOCCUR

RAPIDLY. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL AWAY FROM HEATER. REPLACE GLASS ONLY WITH NEOCERAM GLASS.

COMBUSTIBLE FLOOR MUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING BENEATH THE HEATER AND TO THE FRONT AND SIDES AS

FEB

INDICATED OR TO THE NEAREST PERMITTED COMBUSTIBLE MATERIAL.

OPTIONAL COMPONENT: FAN, ELECTRICAL RATING: VOLTS 115, 60 HZ, 2 AMPS

COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATION: OUTSIDE AIR KIT AND ONE OF THE FOLLOWING DOUBLE WALL CONNECTOR
IN CANADA: LISTED SECURITY MODEL DP, OR OLIVER MACLEOD PRO-VENT PV DOUBLE WALLED CONNECTOR WITH LISTED CHIMNEY SYSTEM:				JAN
SECURITY MODEL S2100, ICC EXCEL 2100.
IN USA:	LISTED DOUBLE WALL CONNECTORS SECURITY MODEL DP, SELKIRK MODEL DS, OLIVER MACLEOD PRO VENT PV, SIMPSON DURA VENT
MODEL DVL, GSW SUPER PIPE 6, METAL-FAB DOUBLE WALL. CONNECTED TO ONE OF THE FOLLOWING COMPATIBLE CHIMNEY SYSTEMS SECURITY
MODEL S2100 OR MODEL ASHT, SELKIRK MODEL SSII, OLIVER MACLEOD PRO JET 3103, SIMPSON DURA PLUS, GSW MODEL SC OR METAL-FAB TEMP/
GUARD, AMERI-TEC HS, ICC EXCEL 2100 . USE CHIMNEY COMPONENTS AS SPECIFIED IN INSTALLATION INSTRUCTIONS.
		MANUFACTURED BY: FIREPLACE PRODUCTS INTERNATIONAL LTD.		MANUFACTURE 2003
		6988 VENTURE ST.
				2004
		DELTA, BC V4G 1H4	MADE IN CANADA
UNITED STATES ENVIRONMENTAL		CERTIFIED TO COMPLY WITH JULY 1990,
	PROTECTION AGENCY	PARTICULATE EMISSION STANDARDS.

			CAUTION
HOT WHILE IN OPERATION DO NOT TOUCH. KEEP CHILDREN,						OF
	CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE
				rev. 01/03		DATE 2002
		SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS.
					WD
				908-733

disc, print at 65% to achieve actual size.	is highlighted in yellow is printed red on gray.
size 8" x 5-3/4". On	on grey except what
copy - exact	printed black
Note: Hard	Everything

14/02: Updated serial number	system . No other changes.
Feb.

Regency Freestanding Woodstove 7