Regency Wraps F33 Fan Replacement, Maintenance, View from back of stove, grommet, Diagram

MAINTENANCE

FAN REPLACEMENT

For Leg Unit: Remove 7 screws, remove bottom access panel and replace fan assembly.

1) Disconnect power to fan.

2) Open pedestal door and remove door cover plate by removing 4 screws. See diagram 1.

Diagram 1

3)Remove valve cover plate by removing 2 screws.

4)Disconnect the molex plug (from inside the stove).

Note: The #8 ground lug is a dedicated ground for mobile home use only.

5)Loosen the four 8-32 x 1/2 screws provided into the nutserts as shown in diagram 3. NOTE: Make sure the fan is supported as it may fall when the 4 screws are loosened.

Wiring Diagram

Diagram 2: Ground Lug

6)Disconnect the 2 ground wires (green and yellow/green striped) to the ground lug as per diagram 2.

Note: The #8 ground lug is a dedicated ground for mobile home use only.

Diagram 3

View from back of stove

	Placement of Decal
Strain relief	“Warning 240 Volts
grommet	Turn Off Power”

Regency® F33-3 Freestanding Gas Stove 19