R0E530640MCU00 User’s Manual 5. Debugging Functions
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 193 of 229
5.13.9 Saving Task Profile Measurement Tasks
Save the current task mode and measurement tasks (task IDs and enabled/disabled states).
Click the Save button of the Realtime Profile Setting dialog box, and the Save As dialog box will be displayed.
Enter a file name in which you want task profile measurement tasks to be saved.
If a file extension is omitted, the extension “.rpf” is automatically attached.
If you specify an existing file name, a message is displayed asking you to confirm whether you want the file to be overwritten.
5.13.10 Loading Task Profile Measurement Tasks
Load task profile measurement tasks.
Click the Load button of the Realtime Profile Setting dialog box, and the Open dialog box will be displayed.
Figure 5.135 Open dialog box
Enter a file name you want to load.
Only the files bearing the extension “.rpf” can be loaded. If you enter any other file extension, an error message is output.
When a file load is complete, the list (task list) in the Realtime Profile Setting dialog box is updated.
If any loaded task IDs are nonexistent, although they are displayed once in the list (task list) in the Realtime Profile Setting
dialog box, it is only the existing task IDs that are registered as measurement tasks when you click the OK button.
Reopening the Realtime Profile Setting dialog box, you can check the currently registered measurement tasks.
If function profile information is included in the loaded file, modes in the Realtime Profile Setting dialog box are switched to
function mode.