R0E530640MCU00 User’s Manual 2. Setup
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 25 of 229
2.3 Connecting/Disconnecting the MCU Unit to/from the E100 Emulator Main Unit
Figure 2.3 shows the procedure for connecting the MCU Unit to the E100 Emulator Main Unit.
Connecting
100
HIGH PERFORMANCE
EMULATOR SYSTEM
R0E530650MCU00
E100 emulator main unit
R0E001000EMU00
MCU Unit
R0E530640MCU00
Insert the MCU unit
following the inside
rails of the main unit.
100
HIGH PERFORMANCE
EMULATOR SYSTEM
R0E530650MCU00
Push the MCU unit dow n
to check it is attached properly.
Disconnecting
R0E530650MCU00
100
HIGH PERFORMANCE
EMULATOR SYSTEM
Pull the MCU unit up.
Figure 2.3 Connecting/Disconnecting the MCU Unit to/from the E100 Emulator Main Unit
CAUTION
Note on Connecting the MCU Unit to the E100 Emulator Main Unit:
z Always shut OFF power when connecting the MCU unit to the E100 emulator main unit. Otherwise, internal
circuits may be damaged.