Renesas HS0720KCU01HE, SH7200 Series

To set the AUD trace acquisition mode, click the [Trace] window with the right mouse button and

select [Setting] from the pop-up menu to display the [Acquisition] dialog box. The AUD trace

acquisition mode can be set in the [AUD mode1] or [AUD mode2] group box in the [Trace mode]

page of the [Acquisition] dialog box.

Figure 2.3 [Trace mode] Page

Contents

Main SuperHFamily E10A-USB Emulator Page Notes regarding these materials Page Contents Page Page Table 1.1 Components of the Emulator 1.2 Connecting the Emulator with the User System 1.3 Installing the H-UDI Port Connector on the User System 1.4 Pin Assignments of the H-UDI Port Connector (1) Pin Assignments of the 36-pin H-UDI Port Connector Figure 1.2 Pin Assignments of the H-UDI Port Connector (36 Pins) H-UDI port connector (top view) H-UDI port connector (front view) (2) Pin Assignments of the 14-pin H-UDI Port Connector Figure 1.3 Pin Assignments of the H-UDI Port Connector (14 Pins) Pin 1 Pin 8 Pin 7 (3) Pin Assignments of the 38-pin H-UDI Port Connector Figure 1.4 Pin Assignments of the H-UDI Port Connector (38 Pins) 1.5 Recommended Circuit between the H-UDI Port Connector and the MCU Page Page Section 2 Software Specifications when Using the SH2A_custom_SoC 2.1 Differences between the MCU and the Emulator Page Page Table 2.4 Operation while Cache is Enabled Page Page 2.2 Specific Functions for the Emulator when Using the SH2A_custom_SoC Table 2.6 Dialog Boxes for Setting Event Conditions Table 2.7 Conditions to Be Set (cont) Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Table 2.15 Measurement Item Page Page http://www.renesas.com