Renesas HS0720KCU01HE, SH7200 Series

Note: When [Ch2 to Ch1 PA] or [Ch1 to Ch 2 PA] is selected, to execute the user program,

specify conditions set in Event Condition 2 and Event Condition 1 and one or more items

for performance measurement.

(b) Measurement item

Items are measured with [Channel 1 to 4] in the [Performance Analysis] dialog box.

Maximum four conditions can be specified at the same time.

Contents

Main SuperHFamily E10A-USB Emulator Page Notes regarding these materials Page Contents Page Page Table 1.1 Components of the Emulator 1.2 Connecting the Emulator with the User System 1.3 Installing the H-UDI Port Connector on the User System 1.4 Pin Assignments of the H-UDI Port Connector (1) Pin Assignments of the 36-pin H-UDI Port Connector Figure 1.2 Pin Assignments of the H-UDI Port Connector (36 Pins) H-UDI port connector (top view) H-UDI port connector (front view) (2) Pin Assignments of the 14-pin H-UDI Port Connector Figure 1.3 Pin Assignments of the H-UDI Port Connector (14 Pins) Pin 1 Pin 8 Pin 7 (3) Pin Assignments of the 38-pin H-UDI Port Connector Figure 1.4 Pin Assignments of the H-UDI Port Connector (38 Pins) 1.5 Recommended Circuit between the H-UDI Port Connector and the MCU Page Page Section 2 Software Specifications when Using the SH2A_custom_SoC 2.1 Differences between the MCU and the Emulator Page Page Table 2.4 Operation while Cache is Enabled Page Page 2.2 Specific Functions for the Emulator when Using the SH2A_custom_SoC Table 2.6 Dialog Boxes for Setting Event Conditions Table 2.7 Conditions to Be Set (cont) Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Table 2.15 Measurement Item Page Page http://www.renesas.com