37
[Setting Method]
(i) Select the [Channel A] and [Channel B] check boxes in the [AUD function] group
box of the [Trace mode] page. Each channel will become valid.
(ii) Open the [Window trace] page and specify the bus cycle, memory range, and bus type that
are to be set for each channel.
Figure 2.5 [Window trace] Page
Note: When [M-Bus] or [I-Bus] is selected, the following bus cycles will be traced.
• M-Bus: A bus cycle generated by the CPU is acquired. A bus cycle is also acquired
when the cache has been hit.