Stellar at a glance | ResMed 100 specification

Stellar at a glance

Handle

H4i connector

plug and ACAir outlet

connection

Oxygen inlet

Infrared connection

Air filter cover

for humidifier

XPOD pulse oximeter connection	DC power socket
FiO2 sensor connection	AC power socket
Data port for USB stick	Power on/standby switch
Remote alarm connection

Data port for direct PC connection

The Stellar comprises:

• Stellar device • Hypoallergenic air filter • AC power cord • Carry bag • 2 m air tubing • ResMed USB stick • Low pressure oxygen connector.

The following optional components are compatible with Stellar:

•3 m air tubing • SlimLine™ air tubing • Clear air tubing (disposable) • H4i™ heated humidifier • Antibacterial filter • Heat moisture exchanger filter (HMEF) • ResMed XPOD

oximeter • Nonin™ pulse oximetry sensors • FiO2 monitoring kit (external cable, T-piece adapter) • FiO2 monitoring sensor • Stellar Mobility bag • ResMed Leak Valve • Tubing wrap.

WARNING

The Stellar should only be used with air tubing and accessories recommended by ResMed. Connection of other air tubing or accessories could result in injury or damage to the device.

ResMed regularly releases new products. Please check the catalogue of ventilation accessories on our website at www.resmed.com.

2

Image 7

ResMed 100 manual Stellar at a glance

Contents

User Guide Stellar Respiratory Care Solutions Making quality of care easy Stellar 100 Stellar Contents Data management Cleaning and maintenance Adverse effects IntroductionIndications for use Contraindications Stellar at a glance ResMed USB stick Internal batteryPatient interface Humidification Remote Alarm Setting up for noninvasive useMobile use Attaching the H4i heated humidifier for noninvasive use Setting up for invasive use Hmef Attaching the pulse oximeter Working with other optional accessoriesAdding supplemental oxygen Stopping therapy using oxygen Starting therapy using oxygenUsing the FiO2 monitoring sensor Attaching an antibacterial filter Connecting a sensor About the control panel Stellar basics LCD screen Starting therapyPerforming a functional test Stopping therapy Starting therapy Working with alarms Turning off the power Using mask-fit Tailoring treatment setup options Using the menus Setup menu Options Setup menuSetup menu Clinical Settings Mask Type Setup menu Alarm Settings Alarm Volume Parameter Description Setup menu Configuration MenuOptions On, Auto Device Information Info menuEvent Summary Used Hours Data management Cleaning and maintenanceDaily Monthly WeeklyReplacing the air filter Multipatient use Disinfection Servicing TroubleshootingAlarm troubleshooting Problem / possible cause Action LCD Internal Battery Empty LCD Blocked Tube Problem / possible cause ActionLCD High Temperature 10, 11, 12 LCD Over Pressure LCD Apnoea LCD Internal Battery LowLCD High Leak LCD Non-Vented Mask Other troubleshooting Device does not stop when you remove your mask Device does not start when you breathe into the maskLearn Circuit failed Technical specifications Power supply Alarm Volume RangeDimensions L x W x H Weight Air outlet Classifications IECAir travel requirements Page Vrms Symbols Mask should never be blocked General warnings and cautionsPage Product Warranty period Limited warranty Respiratory Care Solutions Making quality of care easy EUR1 ENG