Info menu, Event Summary, Used Hours, Reminders | ResMed 2011-09

Info menu

Event Summary

Event summary displays the summary of three types of events: changes in settings, alarms and system events (eg, connection of ResMed USB stick). There are up to 200 events of each type, displayed in chronological order, with the most recent event displayed at the top by default.

Used Hours

Used Hours during the last seven days of treatment are displayed in a bar graph and can be compared to the data of the last 365 days.

Device Information

This screen shows the serial number (displayed as Device SN), software version and other component versions. Data on this screen may be requested for servicing or as part of problem- solving by a technician.

Reminders

The Clinician uses the Reminders menu to alert you to specific events; for example, when to replace the mask, when to replace the filter and so on. The reminder appears in yellow as the date approaches (within 10% of the reminder period). The reminder also displays on the startup screen. You can clear a reminder message by selecting ‘Reset’, which clears the current reminder date to OFF, or displays the next pre-set Reminder date.

18

Image 23

ResMed 2011-09, 248551/1 manual Info menu, Event Summary, Used Hours, Device Information, Reminders

Contents

User Guide Stellar Respiratory Care Solutions Making quality of care easy Stellar 100 Stellar Contents Cleaning and maintenance Adverse effects IntroductionIndications for use Contraindications Stellar at a glance ResMed USB stick Internal batteryPatient interface Humidification Mobile use Setting up for noninvasive use Attaching the H4i heated humidifier for noninvasive use Setting up for invasive use Hmef Adding supplemental oxygen Working with other optional accessoriesAttaching the pulse oximeter Using the FiO2 monitoring sensor Starting therapy using oxygenStopping therapy using oxygen Attaching an antibacterial filter Connecting a sensor About the control panel Stellar basics Performing a functional test Starting therapyLCD screen Check pulse oximeter if in use Starting therapyStopping therapy Check the FiO2 monitoring sensor if in use Working with alarms Turning off the power Using mask-fit Tailoring treatment setup options Using the menus Enu Options Enu Alarm Settings Alarm Volume Options On, Auto Setup menu Configuration MenuParameter Description Device Information Info menuEvent Summary Used Hours Daily Cleaning and maintenanceData management Disinfection WeeklyMonthly Replacing the air filter Servicing TroubleshootingAlarm troubleshooting Multipatient use LCD Over Pressure Problem / possible cause Action LCD Internal Battery EmptyLCD High Temperature 10, 11, 12 LCD System Failure LCD Low Respiratory Rate!, High Respiratory Rate Problem / possible cause Action LCD Circuit disconnectedLCD Internal Battery Low LCD Low Minute Ventilation Other troubleshooting Treatment pressure seems high Problem / possible cause SolutionDevice does not start when you breathe into the mask Device does not stop when you remove your mask Technical specifications Power supply Alarm Volume RangeDimensions L x W x H Weight Air outlet Air travel requirements IECClassifications Vrms General warnings and cautions Symbols General warnings and cautions Product Warranty period Limited warranty Apac