1
Introduction
9
h Rear e-dial (R)
Changes the value for camera settings such as exposure.
(p.38)
You can change the menu tabs when a menu screen
isdisplayed. (p.18)
You can change the settings when the control panel
isdisplayed. (p.17)
In playback mode, use this to magnify an image or display
multiple images at the same time. (p.36, p.62)
iAF button (I)
Available for adjusting focus, instead of pressing the shutter
release button halfway. (p.44)
jAE Lock button (H)
Locks the exposure value before shooting.
In playback mode, the JPEG image that was just taken
canalso be saved in RAW format. (p.36)
kGreen button (M)
Resets the values being adjusted.
Switches to ISO AUTO when adjusting the sensitivity.
lStills/Movies switch
Switches between A (Still capture) mode and C (Movie
recording) mode. (p.33)
mOK button (E)
When a menu or the control panel is displayed,
pressthis button to confirm the selected item.
nChange AF Point/Card slot switch button (c / d)
In capture mode, press this button to enable changing
theAF point. (p.46)
In playback mode, press this button to switch between the
memory cards inserted in the two slots, SD1 and SD2. (p.36)
oFour-way controller (ABCD)
Displays the Drive Mode/Flash Mode/White Balance/
Custom Image setup menu. (p.16)
When a menu or the control panel is displayed, use this
tomove the cursor or change the item to set.
Press B in single image display of playback mode to display
the playback mode palette. (p.61)
When selecting the area of an image to magnify or to use
asa focusing area, you can move the area diagonally by
pressing two keys at the same time.
pMENU button (F)
Displays a menu. Press this button while the menu
isdisplayed to return to the previous screen. (p.18)
With this camera, you can take pictures while looking through
the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take pictures while
checking the status screen displayed on the monitor and
theviewfinder. When not using the viewfinder, you can take
pictures while viewing the Live View image displayed on
themonitor.
The camera is in “standby mode” when it is ready to shoot, such
as when the status screen or Live View image is displayed.
Press G in standby mode to display the “control panel” and
change settings. (p.17) You can change the type of information
displayed in standby mode by pressing G while the control
panel is displayed. (p.12)
Monitor Display

Capture Mode

100
-
3200
100
-
3200
10:30
10:30
12345
12345
12345
12345
12345
12345
12345
12345
1/
1/
F
F
250
250
1600
1600
5.6
5.6
12345
12345
12345
12345
1/
1/
F
F
250
250
1600
1600
5.6
5.6
Status Scre en
Status Screen
ISO AUTO Set tin g
ISO AUTO Setting
Adjustm ent Rang e
Adjustment Range
09/09/2013
09/09/2013
Standby mode
(StatusScreen)
Shooting Info Display selection screen
Control panel
e_kb502_om.book Page 9 Monday, October 14, 2013 4:14 PM