5
Settings
81
3Specify [Auto Resize].
When set to T, JPEG images are saved to the Eye-Fi card
or Flucard at the size of r.
4Press F twice.
u Caution
Be sure to insert an Eye-Fi card or a Flucard in the SD2 slot.
If it is inserted in the SD1 slot, the wireless LAN function
cannot be used. When an Eye-Fi card or a Flucard is not
inserted in the SD2 slot, the [Wireless Memory Card] settings
of the D3 menu cannot be set.
Be sure to set up a wireless LAN access point on a computer
for the card connection.
For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use.
Images may not be transferred when the battery level is low.
It may take time to transfer a large number of images.
Thecamera may turn off if the internal temperature
ofthe camera becomes high.
For precautions on the Eye-Fi card, refer to “About Eye-Fi
Cards” (p.104).
t Memo
A smartphone can be used to operate this camera when
aFlucard compatible with this camera is used. Refer to
theFlucard manual for details on how to use the card.
When an Eye-Fi card is used, 100 images can be stored
ina single folder. For RAW+ images, two files are counted
asone image.
In Step 2, select [Communication Info] to check the Wireless
LAN information, and [Firmware Info/Options] to check
thefirmware version of the cards.
When [Reset Transfer Settings] is selected in Step 2,
the[Action Mode] setting is returned to their default values.
e_kb502_om.book Page 81 Monday, October 14, 2013 4:14 PM