3
Shooting
43
1Press B in standby mode.
2Select a flash mode.
3To compensate the flash

output or when K is

selected, press B and then

use R to adjust the value.

Press M to reset the value to 0.0.
For [Wireless], first press B, then
use CD to select 8 or 9.
4Press E.
The camera returns to standby mode.
5Press 1.
The built-in flash is popped up.
Using the Built-in Flash X
AAuto Flash
Discharge
Automatically measures
theambient light and determines
whether to use the flash.
B
Auto
Flash+Red-
eye Reduction
Discharges a pre-flash for
red-eye reduction before
anautomatic flash.
CFlash On Discharges a flash for each picture.
D
Flash On+
Red-eye
Reduction
Discharges a pre-flash for
red-eye reduction before
themain flash.
ESlow-speed
Sync
Sets to a slow shutter speed.
Use this when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+
Red-eye
Discharges a pre-flash
for red-eye reduction before
themain flash is discharged
withSlow-speed Sync.
Flash On
Flash On
Cancel
Cancel
OK
OK
0.0
0.0
H
G
Trailing
Curtain Sync
Discharges a flash immediately
before closing the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they
are leaving a light trail behind them.
KManual Flash
Discharge
Sets the amount of flash discharge
between FULL and 1/128.
8
9Wireless
Synchronizes the dedicated
external flash without using
async cord. (p.85)
Select [Wireless (Master)]
or[Wireless (Controller)].
Flash On
Flash On
Cancel
Cancel
OK
OK
+0.7
+0.7
e_kb502_om.book Page 43 Monday, October 14, 2013 4:14 PM