4
Playback

65

Connect to an AV device, such as a TV, equipped with an HDMI
terminal to display Live View images while shooting or to play
back images in playback mode.
Make sure to have a commercially available HDMI cable
equipped with an HDMI terminal (type D).
1Turn the AV device and camera off.
2Open the terminal cover of the camera, and connect
the cable to the HDMI terminal.
3Connect the other end of the cable to the input
terminal on the AV device.
4Turn the AV device and camera on.
The camera turns on in HDMI mode, and the camera
information is displayed on the screen of the connected AV
device.
u Caution
While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
volume on the camera. Adjust the volume on the AV device.
t Memo
Check the operating manual of the AV device and select
asuitable input terminal for connecting the camera.
If you intend to use the camera continuously for a long period,
use of the optional AC adapter kit is recommended.
By default, the maximum resolution corresponding to the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [HDMI Out]
ofthe D2 menu.

Connecting the Camera to an AV Device

e_kb502_om.book Page 65 Monday, October 14, 2013 4:14 PM