1
Introduction
26
E3
15. AF.S Setting Sets the action priority for when the focus mode is set to x
and the shutter release button is fully pressed. Focus-priority p.45
16. 1st Frame Action in AF.C Sets the action priority for the first frame when the focus mode
isset to y and the shutter release button is fully pressed.
Release-
priority p.45
17. Action in AF.C Continuous Sets the action priority during continuous shooting when
thefocus mode is set to y.Focus-priority p.45
18. Hold AF Status
Sets whether to maintain the focus for a certain amount of time
when the subject happens to move out of the selected focusing
area after being focused.
Off p.45
19. AF with Remote Control Sets whether to use autofocus when shooting with a remote
control unit. Off p.51
20. Release While Charging Sets whether to release the shutter while the built-in flash
isbeing charged. Off p.44
21. Color Space Sets the color space to use. sRGB
E4
22. LCD Panel Illumination Sets the illumination for the LCD panel. High p.15
23. Save Rotation Info Sets whether to save rotation information when shooting. On p.64
24. Save Menu Location The last menu tab displayed on the monitor is saved,
andit is displayed again the next time F is pressed.
Reset Menu
Location p.18
25. Catch-in Focus
Sets whether to enable Catch-in Focus shooting when a manual
focus lens is attached, and the shutter is released automatically
when the subject comes into focus.
Off –
26. AF Fine Adjustment Allows you to precisely fine tune your lenses with the camera’s
autofocus system. Off p.47
27. Using Aperture Ring Sets whether to enable shutter release when the lens aperture
ring is set to a position other than 9.Disable p.85
Reset Custom Functions Resets all the settings of the Cu stom Setting menu to the defaults. –
Menu Item Function Default Setting Page
e_kb502_om.book Page 26 Monday, October 14, 2013 4:14 PM