2
Getting Started

28

u Caution
When attaching or removing the lens, choose an environment
that is relatively free of dirt and dust.
Keep the body mount cover on the camera when a lens is not
attached.
Be sure to attach the lens mount cover and lens cap to
thelens after removing it from the camera.
Do not insert your fingers inside the lens mount of the camera
or touch the mirror.
The camera body and lens mount incorporate lens
information contacts. Dirt, dust, or corrosion may damage
theelectrical system. Please contact your nearest service
center for professional cleaning.
We assume no responsibility nor liability for accidents,
damages and malfunctions resulting from the use of lenses
made by other manufacturers.
t Memo
Refer to “Functions Available with Various Lenses” (p.83)
fordetails on the functions of each lens.
Use the battery D-LI90 and battery charger D-BC90 exclusively
developed for this camera.
1Connect the AC plug cord to the battery charger.
2Plug the AC plug cord into the power outlet.
3Face the A mark on the battery up, and insert it into
the battery charger.
The indicator lamp is lit while charging and turns off
whenthe battery is fully charged.
u Caution
Do not use the battery charger D-BC90 to charge batteries
other than D-LI90. Charging other batteries may cause
damage or heating.
Replace the battery with a new one in the following cases:
If the indicator lamp blinks or does not light after the battery
is inserted correctly
If the battery starts to run down more quickly even after
being charged (the battery may have reached the end
ofits service life)

Using the Battery and Charger

Charging the Battery

Lithium-ion battery
Battery charger
Indicator lamp
AC plug cord
312
e_kb502_om.book Page 28 Monday, October 14, 2013 4:14 PM