xii
❖
❖❖
❖Change the selected setting (function) when the {
{{
{Clear Modes/Energy Saver}
}}
} key is
pressed
When the power is turned on, after Auto Reset, or the {Clear Modes/Energy Sav-
er} key has been pressed, you can change the density, paper cut method, and
other function settings that are selected on the screen. To use this function, the
settings you want to use must already be stored in program 20. You must also
select Program No.20 for the Initial Mode Set settings in User Tools (Copier
Features).
This way, you can call up settings you frequently use at any time. Program
No.20 is a special mode that can change the initial mode settings. See P.126
“Initial Mode Set”