Setting Originals
31
2
Setting Originals
Note
❒Place the original after correction
fluid and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
❒Dust and residue from originals
drawn with a pencil can mark the
exposure glass and cause marks to
be copied. We recommend using
the carrier sheet for this type of
original.
❒If the rear edge of the original is
badly curled, smooth out the curl
with both hands before scanning
the original. If the original is insert-
ed as it is, it may be damaged.
❒When copying curled originals,
use the copy output (front) auxilia-
ry tray.
❒Do not use force to push the side
fence of the original guides.
Reference
For details about precautions with
originals, see P.13 “Originals”
AAdjust the original guides to the
size of the paper width.
Note
❒Make sure that the original
guides are not too tight.
BCarefully place the original be-
tween the original guides, using
both hands, with the side to cop-
ied face up.
Important
❒Do not release your hands until
that the original is pulled into
the machine.
❒Once the originals start to feed
into the machine, do not push or
pull them. This may damage
your originals,
❒If the originals are fed at a slant
or become jammed, press the
{Scanner Stop} key.
❒Do not operate the document
roller while originals are being
fed through the machine. This
may damage your originals,
ZEDH190E
ZEDH180E
ZEDH150E