Copying
68
2
Margin Adjustment
When Synchro Cut is selected, you
can create a margin for the leading
edge and trailing edge of the original,
and cut unnecessary parts of the
copy.
Preparation
You can select the following types
of margin for this function.
• Top (+): Creates a margin for
the leading edge of the original
(top of the copy).
• Top (-): Reduces the margin for
the leading edge of the original
(top of the copy.)
• Bottom (+): Creates a margin for
the trailing edge of the original
(bottom of the copy.)
• Bottom (-): reduces the margin
for the trailing edge of the origi-
nal (bottom of the copy.)
You can set the margin from -200
to +200mm, in steps of 1mm (from
-7.8" to 7.8", in steps of 0.1").
The default margin setting is
20mm, 2.0". You can change this
default setting. See P.133 “Margin
Adjustment Priority”
Press the top [
+
][
-
] and bottom [
+
]
[-]
keys to set the margins.
The copy length will be the speci-
fied length plus or minus the
amount of the margin.
APress the [Shift/Erase] key.
ZEDG120E