Partial Copy

57

2
Partial Copy
Copies only a specified portion of the
original.
Reference
You can specify the start position
(Y1) and the end position (Y2). See
P.130 “Partial Copy Priority”
APress the {
{{
{Sample Copy/Partial
Copy}
}}
} key.
BPress the [Partial Copy] key.
CPress the [Y2] key, and then enter
the scan end position with the
number keys.
Note
❒To change the value entered,
press the {Clear/Stop} key and
enter the new value.
❒The minimum length for Partial
Copy is 210mm (8.3") (250mm
(9.8") for paper roll 3). Enter a
value for Y2-Y1> that specifies a
length of at least 210mm (8.3")
(250mm (9.8") for paper roll 3).
❒If the length specified by [Y2]
and [Y1] is less than 210mm, the
machine adjusts the start posi-
tion based on the last number
you entered.
DPress the [Y1] key, and then enter
the scan start position.
EPress the [OK] key.
FMake your desired settings.
Reference
For details, see explanations of
each function.
GPlace your originals.
The machine makes a copy of the
specified area.

Exiting Partial Copy

APress the {
{{
{Clear Modes/Energy
Saver}
}}
} key.
ZEDS081E