Basic Functions
43
2
Limitation
❒If you select the tray paper type
setting to [Translucent] or [Film] (ex-
cept for [Plain] or [Recycled paper]),
the auto paper select function will
not be used. For tray paper type
setting, see "Tray Paper Type" in
the System Settings manual.
❒If the type of paper changes when
you select the paper source, it may
take longer for copying to start.
❒When using a 30" width original,
set the original size auto detect set-
ting to off. See P.128 “Original Size
Auto Detect”
Note
❒If you press the {Clear Modes/Energy
Saver} key immediately after turn-
ing the power on, you can specify
the paper roll to be used as the de-
fault setting for Auto Reset. The
default setting is paper roll 1. See
P.127 “Paper Roll Priority”
Reference
⇒ P.46 “Copying from the Bypass
Tray”
Auto paper select
AMake sure that the [Auto Paper Se-
lect] key is selected.
Note
❒When Auto Paper Select is se-
lected, it may take slightly long-
er for copies to make since the
machine selects the paper after
scanning the original.
Manual paper select
ASelect the paper roll 1, paper roll
2, paper roll 3 (option), or bypass
tray.
Auto Reduce/Enlarge
The machine can choose an appropri-
ate magnification based on the paper
and original sizes you select.
ZEDG020E