Ricoh GX200 manual 125

Setting the Flash Amount in Manual Flash Mode (Man. Flash Amount)

You can set the internal flash amount when the flash mode is set to [Manual Flash] (GP.51). The flash amount can be set at [Full] or [1/1.4], [1/2], [1/2.8], [1/4], [1/5.6], [1/8], [1/11], [1/16], [1/22], [1/32] of the maximum amount.

1Displaying the shooting menu.

• For the operating procedure, see P.103.

2Press the " button to select [Man. Flash Amount] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button.

• The setting appears on the screen when the flash mode is set to [Manual Flash].

Note ----------------------------------------------------------------------------------------------

•The value set in [Man. Flash Amount] is available only when the flash mode is set to [Manual Flash]. (GP.51)

•When the flash mode is set to [Manual Flash], the [Man. Flash Amount] setting will be enabled, the [Flash Expo.Comp.] setting will no longer be enabled.

•The [Man. Flash Amount] setting and the actual flash amount may differ slightly in some cases.

Caution------------------------------------------------------------------------------------------

1

Various Shooting Functions

The flash amount is not adjusted automatically when the flash mode is set to [Manual Flash]. Do not fire the flash near eyes (especially of infants) or at people who are driving, etc.

125