Ricoh GX200 Setting the Date and Time, Press the !#$buttons to set the year, month, date and time

Setting the Date and Time

When the power is turned on for the first time, the date/time setting screen appears.

If you are using the camera for the first time,

1

2

3

Press the !"#$buttons to set the year, month, date and time.

•Change the value with !" and move the frame with #$.

•You can cancel the setting by pressing the DISP. Button.

In [Format], choose the date and time format.

•Select the date and time format with !".

Check the information on the screen and then press the MENU/OK button.

• The date is set.

Date Settings
Date	2008	01	01
Time	00	00
Format	Y/M/D hh:mm
2008/01/01		00:00
Cancel		Ok
Setting at shipping
Date Settings
Date	2008	01	01
Time	00	00
Format	Y/M/D hh:mm
2008/01/01		00:00
Cancel		Ok

read this section.

Note ---------------------------------------------------------------------------------------------------

•If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.

•To retain the date and time settings, load a battery with adequate remaining power for more than two hours.

•The set date and time can be changed later. (GP.215)

•The date and time can be inserted into images. (GP.136)

42