Ricoh GX200 manual 198, Changing the Operation Sound Setting Operation Sounds

5

Changing Camera Settings

Changing the Operation Sound Setting (Operation Sounds)

The following five operation sounds are made during camera operation.

Start sound	: Sound when the camera is turned on.
Shutter	: Sound when the shutter release button is pressed.
Focus sound	: Sound when the shutter release button is half-pressed and the
	camera focuses on the subject.
Beep Sound	: Error sound indicating an operation that cannot be performed.
LevelSound	: When [Level Setting] is set to [Sound] or [Disp + Snd] (GP.202),
	the sound is continually emitted at a set interval when the camera is
	level in shooting mode.
Available Settings	Description
All	All sounds on
*Default setting
LevelSound	Only the level sound will emit.
Shutter	Only the shutter sound and level sound will emit.
Note ----------------------------------------------------------------------------------------------

If you try to perform an operation that cannot be performed, the beep sound can be heard regardless of the [Operation Sounds] setting.

1Display the setup menu.

• For the operating procedure, see P.184.

2Press the " button to select [Operation Sounds] and press the $ button.

3Press the !" buttons to select the desired setting.

4Press the MENU/OK button.

Note ----------------------------------------------------------------------------------------------

The operation sound setting can be changed. (GP.199)

198