Ricoh GX200 manual 237, Shooting

Problem	Cause	Solution	Refer to
Cannot charge the	Rechargeable battery has	Replace with a new rechargeable	P.37
rechargeable battery.	reached the end of its useful life.	battery.
Battery runs out quickly.	It is being used at extreme high or	-	-
	low temperatures.
	Many shots are being taken in	-	-
	dark places or other location
	requiring extensive use of flash.

Shooting

Problem	Cause	Solution	Refer to
The camera does not	Battery is exhausted.	When using the dedicated	P.36
shoot even if you press		rechargeable battery or AAA	P.32
the shutter release		nickel-metal hydride batteries,	P.250
button.		charge the batteries as required.
		When using AAA alkaline
		batteries or AAA oxyride
		batteries, replace them with new
		batteries.
	The camera is not on.	Press the POWER button to turn	P.39
		the camera on.
	The camera is in playback mode.	Press the 6 (Playback) button	P.55
		to select the shooting mode.
	The shutter release button is not	Press the shutter release button	P.45
	pressed all the way.	all the way.
	The SD memory card is not	Format the card.	P.186
	formatted.
	The SD memory card is full.	Load a new card, or delete	P.60
		unwanted files.	P.37
	The SD memory card has	Load a new SD memory card.	P.37
	reached the end of its useful life.
	The flash is charging.	Wait until the Auto Focus/Flash	P.51
		lamp stops blinking.
	The SD memory card is locked.	Unlock the card.	P.35
	The contact surface of the SD	Wipe with a soft, dry cloth.	-
	memory card is dirty.
Unable to view the shot	The image confirmation time is	Lengthen the image confirmation	P.208
image.	too short.	time.
Images do not appear on	The camera is not on or the	Turn the camera on or adjust the	P.39
the picture display.	picture display is dark.	brightness of the picture display.	P.188
	The picture display is off.	Press the VF/LCD button to turn	P.64
		the picture display on.
	Display has been switched to the	Press the VF/LCD button to	P.24
	LCD viewfinder.	switch to the picture display.
	The VIDEO/AV cable is	Disconnect the VIDEO/AV cable.	P.175
	connected.
Nothing displays in the	The LCD viewfinder is not fully	Fully attach the LCD viewfinder.	-
LCD viewfinder.	attached.

Appendices

7

237