Ricoh GX200 manual Loading the Battery and SD Memory Card, Insert the rechargeable battery

Loading the Battery and SD Memory Card

The rechargeable battery (DB-60) can be used to power this camera. This battery is convenient because the battery power lasts long and it can be used over and over again by recharging. If the camera is already turned on, make sure it is turned off before loading the battery and card.

If

1 Slide the release lever toward “OPEN” to open the battery/ card cover.

2 Make sure the SD memory card is facing the right way and then push the card all the way in until it clicks.

•The rechargeable battery may be inserted first.

3 Insert the rechargeable battery.

•Press the latch with the battery and insert the battery all the way into the battery compartment.

•When the rechargeable battery is loaded in place, it is locked with the latch.

4 Close the battery/card cover and slide the release lever in the opposite direction of “OPEN” to lock it in place.

1

2

Logo side

1

2

you are using the camera for the first time, read this section.

37