Ricoh GX200 manual 137

Using the Camera Shake Correction Function to Prevent Camera Shake (Camera Shake Cor)

You can prevent camera shake by turning on the camera shake correction function.

At the time of purchase, the camera shake correction function is turned on.

1Displaying the shooting menu.

•For the operating procedure, see P.103.

2Press the " button to select [Camera Shake Cor] and press the $ button.

3Press the !" buttons to select [On].

4Press the MENU/OK button.

•The symbol appears on the screen.

Caution------------------------------------------------------------------------------------------

•In multi-shot mode or manual exposure mode, when the shutter speed is set to 1 or more seconds, the camera shake correction function cannot be used. When the camera shake correction function is turned on in multi-shot mode or the shutter speed is set to 1 or more seconds in manual exposure mode, Echanges to F.

•The camera shake correction function does not work in movie mode. If you select 3 [Movie] in scene mode, the Edisplay disappears.

•The camera shake correction function cannot prevent movement of the shooting subject (caused by wind, etc.).

•Effects of the camera shake correction function vary depending on the surroundings.

Note ----------------------------------------------------------------------------------------------

1

Various Shooting Functions

The Jsymbol appears when camera shake is likely to occur. (GP.44) 137