Ricoh GX200 manual 234

Downloading Images to Your Computer

6

4From the displayed drive,

copy a file to the desired location.

• The figure below shows the folder configuration in the drive.

• When the contents of the internal memory are displayed, the drive name is [RICOHDCI].

Caution------------------------------------------------------------------------------------------

•Do not force the USB cable into the terminal.

•Do not apply excessive force with the USB cable connected.

•When using the USB cable, do not move the camera with the USB cable.

Disconnecting the Camera from Your Computer

1Drag and drop the displayed drive or the volume icon to the “Trash”.

•If a screen appears prompting you to enter the administrator’s password, enter the password.

2Disconnect the USB cable.

Note ----------------------------------------------------------------------------------------------

•You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu in Mac OS X to cancel the connection.

•If the USB cable is disconnected without disabling the connection, the Unsafe Removal of Device screen may be displayed. Be sure to stop the connection before removing the USB cable.

•Do not disconnect the USB cable during image downloading. Make sure that downloading has completed, disable the connection, and then disconnect the cable.

•When you connect your camera to a Macintosh computer, a file called “Finder .DAT/ DS_Store” may be created in your SD memory card, which will appear as [Unmatched File] on your camera. You can delete this file from the SD memory card if you wish.

234