Ricoh 170543 The GF-1 Flash Unit Optional, Close the flash cover page, Attach the flash, mode

The GF-1 Flash Unit (Optional)

An optional GF-1 flash unit can be connected to the hot shoe.

	1	Close the flash cover (page 2).
	2	Attach the flash.
		Turn the camera and the	Hot shoe
		GF-1 off and attach the
		GF-1 to the hot shoe.

 3 Turn the flash and camera on.

 4 Press the DIRECT button.

5	Select the optional flash mode item.
	Move the cursor using
	+, –,Fn1, Fn2 or the ADJ.
	lever (left and right) to
	highlight the item.
6	Select a flash	mode.
	Rotate the up-down dial to select a flash mode.
Note
• The optional flash		mode item is not displayed when the GF-1 is

turned off.

• Turn the GF-1 off to shoot without the flash.

• If the optional flash mode item is not displayed, turn the GF-1 and camera off and then remove and reattach flash.

TechnicalN otes

181