Basics

Saving Energy

If not used for a certain period of time after printing, the machine will enter the Energy Saver or Auto Off mode to reduce energy consumption.

2

❖ Energy Saver mode

The display goes off. Printing from a computer is possible in this mode.

To operate the machine, press the Operation switch, or place originals on the exposure glass or in the ADF.

To go back into the Energy Saver mode, press the Operation switch.

•a cover is open

•you are making changes with User Tools

•the user code entry screen is dis- played

•the Data In indicator is lit or blinking

•you are setting the mode on the control panel

•it is stopping on the online printing mode

•the stored file's screen is dis- played

•the overlay mode with selecting stored file is set.

❖Auto Off mode

The machine turns off automatical- ly. To use it, turn the main switch on.

Note

❒You can select which mode the ma- chine enters after a specified peri- od has passed following job completion. See p.156 “Energy Saver Option”.

❒You can change the time the ma- chine waits before Energy Saver or Auto Off mode starts. See p.155 “Energy Saver Timer”.

Note

❒The machine will not automatical- ly enter the Energy Saver or Auto Off mode in the following cases if:

•a warning message appears

•there is no ink

•originals or paper are jammed

•it is making master or printing

•it is loading original images into memory

•there is no paper

•there is no master

•originals are left in the ADF

Auto Off Timer

You can set the machine to turn itself off at a specified time everyday.

Make the timer setting in User Tools. See p.155 “Auto Off Timer”.

Note

❒The machine will not automatical- ly turn itself off if you are using it at the set time.

48