Motor Specifications and Electrical Requirements (continued)
110-120 Volt, 60 Hz. Tool Information
NOTE: The plug supplied on your tool may not fit into the outlet you are planning to use. Your local electrical code may require slightly different power cord plug connections. If these differences exist refer to and make the proper adjustments per your local code before your tool is plugged in and turned on.
In the event of a malfunction or break- down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment grounding conductor and a grounding plug, as shown. The plug must be plugged into a matching outlet that is properly installed and grounded in accor- dance with all local codes and ordi- nances.
Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.
Improper connection of the equipment grounding conductor can result in a risk of electric shock. The conductor with insula- tion having an outer surface that is green with or without yellow stripes is the equip- ment grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment- grounding conductor to a live terminal.
If the grounding instructions are not com- pletely understood, or if you are in doubt as to whether the tool is properly grounded check with a qualified electri- cian or service personnel.
WARNING: If not properly grounded, this tool can cause an electrical shock, particularly when used in damp locations, in proximity to plumbing, or outdoors. If an elec- trical shock occurs there is the potential of a secondary hazard, such as your hands to hit the cut- ting tool.
Properly |
|
Grounded |
|
|
|
| Grounding |
| Prong |
8
