Rinnai R98LSe Setting the Temperature, Temperature Options Without a Remote Controller, Danger

Setting the Temperature

DANGER

1. Press the “Priority button” on the remote controller. The green Priority light will glow indicating that this controller is controlling the temperature and that the Rinnai water heater is ready to supply hot water.

The priority can only be changed while no hot water is running.

2.Press the or buttons to obtain the desired temperature setting.

All hot water sources are able to provide water at this temperature setting until it is changed again at this or another remote controller.

Temperature Options Without a Remote Controller

The default temperature setting for this appliance installed without a remote controller is 120º F (49º C). If desired the temperature setting can be changed to 140º F (60º C) by adjustment of a dip switch.

Set dip switch 5 to ON to obtain 140º F water temperature setting.

Set dip switch 5 to OFF (default) to obtain 120º F water temperature setting.

120º F (49º C)				140º F (60º C)
	Switch No.				Switch No.
		ON				ON
	O				O
			1				1
	F		2		F		2
	F				F
			3				3
			4				4
			5				5
			6				6
			7				7
			8				8

8 VA Series Outdoor LS Manual