UK INSTALLATION INSTRUCTIONS
IMPORTANT INFORMATION
This appliance may only be installed by someone certified competent to do so. At the time of printing the only people deemed competent to install this appliance are those that are CORGI registered for this type of appliance in this type of location who have a current ACS certificate.
1.Gas safety (Installation & Use) regulations 1998 are the ‘Rules in force’. In your own interest and that of safety, it is law that all gas appliances are installed by competent persons in accordance with the above regulations. Failure to install appliances correctly could lead to prosecution. Other persons should NOT attempt to install this equipment.
2.Building Regulations G3 require installers of unvented systems to be competent to do so. Competence can be shown by holding a current certificate in Unvented Domestic Hot Water Systems. If the Infinity is installed in a flow and return, or tank system, or any other closed system then the system is unvented.
3.Installation must be carried out in accordance with the current issue of the following:
Building Regulations issued by the Department of the Environment Building Standards (Scotland) Regulations.
I.E.E. Wiring regulations for electrical installations.
Gas safety (Installation and Use) Regulations current issue. BS 5546
BS 5440 BS 6891 BS 5482 BS 6700 BS 6644
Institute of Gas Engineers Publications Local byelaws
Water regulations
Health and safety at work etc. Act 1974 IGE/UP/10 Part1 Edition 2.
Building Regulation J
Such other specifications and regulations that may supersede or complement the above documents.
Please be sure that you are fully aware of your obligations and responsibilities under these regulations.
20
