FEATURES AND BENEFITS

Congratulations on purchasing the Technologically Advanced, Temperature Controlled, Rinnai Hot Water System.

ξ The Rinnai Infinity 16i will NEVER RUN OUT of hot water. As long as electricity, water, and gas supplies are connected, hot water is available when hot water taps are open.

ξ Built into the main micro-processor is the facility to LIMIT THE MAXIMUM TEMPERATURE of the hot water supplied. The water temperature may be set to various temperatures. This is particularly useful when the hot water unit is installed where young children or the infirm may be using the hot water. If required, the temperature can be changed via the control pad on the front of the unit or with a localised controller. For further information, please contact Rinnai.

ξ Rinnai Infinity internal units are powered flue appliances. This makes them COMPACT, saving both floor and wall space.

ξ The temperature of outgoing hot water is CONSTANTLY MONITORED by a BUILT- IN SENSOR. If the temperature of the outgoing hot water rises to more than 55°C the burner is shut OFF and only turned ON again when the temperature falls to below the selected temperature.

ξ The burner lights automatically when the hot water tap is opened, and extinguishes when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When the hot water tap is off, no gas is used.

ξ The 16i has a built in controller on the front of the unit for easy control. Two additional external temperature controllers can be mounted remotely from the heater. This offers the following additional features:

Localised temperature setting. Diagnostic message.

Error Codes.

ξ Temperatures selected at the controllers are retained in the SYSTEM MEMORY when the controller gives up priority or the system is turned off. Temperatures over 550C will revert to 550C when power and/or priority is regained.

ξ Operating NOISE LEVEL IS VERY LOW.

ξ ERROR MESSAGES ARE DISPLAYED on the Temperature Controllers, assisting with service.

ξ FROST PROTECTION device built in as standard.

5

Page 4 Page 6
Page 5
Image 5
Rinnai REU - 16 FUA - E user manual Features and Benefits, Operating Noise Level is Very LOW
Page 4 Page 6

REU - 16 FUA - E specifications

The Rinnai REU-16 FUA-E is a cutting-edge tankless water heater designed for efficiency and convenience. This model is part of Rinnai's renowned line of high-performance appliances, catering to both residential and commercial applications. It boasts a sleek design coupled with advanced technology that sets it apart in the crowded water heating market.

One of the most notable features of the REU-16 FUA-E is its impressive heating capacity. It is capable of delivering hot water on demand, with a maximum output of 16 liters per minute. This means you can comfortably run multiple hot water fixtures simultaneously without experiencing a drop in temperature or flow rate. Whether you’re taking a shower, running the dishwasher, or washing clothes, this unit meets the demand with ease.

The REU-16 FUA-E employs a state-of-the-art condensing technology, which enhances its efficiency by capturing and reusing some of the heat that would otherwise escape through the flue. This allows for an energy efficiency rating of up to 95%, significantly reducing energy bills and environmental impact compared to traditional storage water heaters.

Another key characteristic of this unit is its compact size. The Rinnai REU-16 FUA-E can be installed in smaller spaces, making it an ideal option for apartments, houses, or commercial properties with limited room for bulky tank units. Its flexibility in installation positions—whether indoors or outdoors—provides additional versatility to users.

Safety is also a primary concern with the REU-16 FUA-E. It comes equipped with numerous safety features, including an anti-freezing function, overheat protection, and venting safety controls. These safeguards ensure safe operation for you and your family, providing peace of mind whether it’s running constantly or in standby mode.

In terms of controls, the Rinnai REU-16 FUA-E offers modern digital displays that provide real-time monitoring of water temperature and status. This user-friendly interface makes it easier for homeowners or users to adjust settings according to their preferences.

Overall, the Rinnai REU-16 FUA-E encapsulates innovation and efficiency in water heating. Its combination of advanced technology, high performance, compact design, and safety features makes it a reliable choice for those seeking a consistent supply of hot water without the limitations of traditional systems. Whether for residential use or commercial applications, the REU-16 FUA-E is engineered to provide lasting performance and convenience.
Top Page Image Contents