Rinnai RHFE-750ETRA installation manual Specifications, Natural Gas, Propane Gas

			Specifications
Application		Vented gas fireplace heater; Inbuilt only; for residential installation, commer-
		cial setting, or manufactured home; not designed for installation in a solid-fuel
		burning fireplace
Certification		CSA certified according to ANSI Z21.88, CSA 2.33
General Description		Inbuilt convector, glass and steel fronted, ceramic log space heater with
		forced convection and power flue system
Operation		Push button electronic / remote control
Gas Connection		Flex line is 3/8 inch flare nut;
		ball valve is 1/2 inch female x 3/8 inch flare
Gas Control		Electronic
Burners		Flame burners
Temperature Control		Electronic thermostat
Logs		Ceramic
Ignition System		Electronic spark ignition
Flue System		The flue must be terminated to atmosphere. Only flue components listed with
		the appliance’s certification can be used. Warranty will be voided if non-listed
		components are installed.
Electrical Connection		AC 120V, 60 Hz
Fan		(134 to 212 CFM)
Weight		150 lb (68 kg)
AFUE		79% NG;		81% LP (up to 83% with extended vent of 7.2 ft [2.2 m] and no
		elbows)
Venting		Twin flue: maximum 6.5 ft with 2 elbows
		Concentric: maximum 33 ft with 3 elbows
				Natural Gas		Propane Gas
	Minimum supply gas pressure			4.3 in (109 mm) W.C.		9.8 in (249 mm) W.C.
	Maximum supply gas pressure			10.5 in (267 mm) W.C.		13.0 in (330 mm) W.C.
	Manifold test pressure			Factory Set		Factory Set
	BTU/hour input		Natural Gas:		Low - 11,000 BTU/h; High - 29,000 BTU/h
			Propane:		Low - 11,000 BTU/h; High - 28,000 BTU/h
	BTU/hour output		Natural Gas:		Low - 8,635 BTU/h; High - 21,900 BTU/h
			Propane:		Low - 8,855 BTU/h; High - 21,840 BTU/h

Rinnai is continually updating and improving products. Therefore, specifications are subject to change without prior notice.

4 Rinnai Corporation RHFE-750ETRA