Air Guide Vanes, Install the Front Panel | Rinnai RHFE-750ETRA

Final Assembly

Air Guide Vanes

To move the air flow more to the right or to the left, bend the air guide vanes using only light hand pressure.

Do not bend repeatedly (no more than 5 times) or else the vane will break.

Install the Front Panel

1.Install the front panel by hooking the top into the body and rotating the bottom towards the appliance.

Hook top first

Front Panel

then rotate inward

2.Secure the front panel to the appliance using two screws through the front of the warm air discharge louvers.

3.Set the top panel into place. Open the side louvers and on each side attach the top panel with one screw. (Side louvers are opened by pushing

in and releasing.)

Rinnai Corporation RHFE-750ETRA

29

Image 29

Rinnai RHFE-750ETRA installation manual Air Guide Vanes, Install the Front Panel

Contents

RHFE-750ETRA Table of Contents Safety Behavior and Practices Safety Features Natural Gas Propane Gas Specifications Dimensions Features Description Part Number Front PanelFront Panel Models Remote Control Care Remote Control Features Sequence of Operations Remote Control OperationBasic Fireplace Operations Turning on and OFF Flame Function Adjusting the TemperatureObstruction of Warm Air Discharge Lock Function Programming the clock and timers TimersUsing the Override Pre-heat Maintenance Care and MaintenanceFilters Visual Inspection of Flame Care of Exterior Cleaning Combustion Chamber Glass Problem Possible Solutions or Explanation Troubleshooting Code Fault Remedy Fault CodesReplacement of Thermal Fuse General Instructions Parts Included for Installation Flue Terminal Clearances Clearances to CombustiblesSide clearances for air vents Clearances for a Mantle or Decorative Overhang Description Canadian Installations US Installations 28.3 in 720 mm Location Correct Floor Venting Flue Manifold InstallationVenting with Flue Manifolds FOT-203 and FOT-204 Drilling Flue and Gas Supply Holes + c II. Extended Venting Horizontal and Vertical Terminations Maximum Length = 33 feet 10 m and 3 elbows Manufacturer Metal-FabPart Description Number Additional Venting Clearances Vent Length Switch Connections Mounting points Install the Logs Final Assembly Condensate Tray Air Guide Vanes Install the Front Panel Operating Instructions For Your Safety Read Before Operating Wiring and Schematic Diagrams Parts List Parts List 109 QTY Description Comments NG Left and Right Packing for AIR Inlet BOX Limited Warranty Warranty InformationWhat is covered? RHFE-750ETRA Direct Vent Fireplace Limitation on warranties How do I get service? What is not covered?What will Rinnai do? Issue G