SPECIFICATIONS
MODEL- POWER | T10001 bd |
| T20001 bd | ||
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts | |||||
4 | Load Per Channel | 500 Watts x 1 |
| 750 Watts x 1 | |
| |||||
2 | Load Per Channel | 750 Watts x 1 |
| 1500 Watts x 1 | |
1 | Load Per Channel | 1000 Watts x 1 |
| 2000 Watts x 1 | |
1 |
| Height | 2.6" (6.60cm) |
| 2.6" (6.60cm) |
Dimensions: |
| ||||
|
| Width | 12.8" (32.51cm) |
| 12.8" (32.51cm) |
|
| Length | 18" (45.72cm) |
| 23" (58.42cm) |
Amplifier Fuse Rating (Amp/Type) | (1) 150A / ANL |
| (1) 250A / ANL | ||
Battery Fuse Rating (Amp) External | 150A |
| 250A | ||
(Not Supplied) |
|
|
|
| |
|
|
|
| ||
T30001 bd
1000 Watts x 1
2000 Watts x 1
3000 Watts x 1
2.6" (6.60cm)
12.8" (32.51cm)
33" (83.82cm)
(1)300A / ANL
300A
>80dB | |
Crossover Slope | 24dB/octave Butterworth |
Crossover Frequency | variable from 32Hz to 250Hz |
Frequency Response | 20Hz to 250Hz |
Slew Rate | 30 Volts/µS |
IM Distortion (IHF) | <0.05% |
Signal Voltage Adjustment Range | Variable from 150mV to 4V (RCA Input) |
Protection | Short circuit protection shut downs the amplifier in |
| case of very low impedance or shorted speaker wires. |
Equalization (Variable Punch Bass) | Thermal switch shuts down the amplifier in case of overheating. |
Variable from 0dB to +18dB @ variable 35 to 70Hz | |
Input Impedance | 10k ohms |
Infrasonic Filter | Selectable 12dB/Octave, |
These specifications are Amplifier Power Standard
Specifications subject to change without notice
14
