Roland KR111 Connecting external amplifiers and other devices, Leaving demo mode, Playing back a Style demo song, Sending audio to external equipment

KR111 Digital Intelligent Piano

First steps

(3)If necessary, press another [Tone] button to select another song.

If you like, you can press [Song] to launch playback of the general demo song (see above).

(4)Press [Start÷Stop] to stop Tone demo song playback.

Playing back a Style demo song

(1)Select demo mode (see step (1) above).

(2)Press a [Music¥Style] button to select the demo song of the corresponding family.

Playback of the Style demo song starts automatically. The display’s message line now looks as follows:

DemStyle=101

You can now press [Start÷Stop] to stop playback of the currently selected Style demo song. If you press this button again, the next Style demo song will be played back.

(3)If necessary, press another [Style] button to select another song.

If you like, you can press [Song] to launch playback of the general demo song (see above).

(4)Press [Start÷Stop] to stop Style demo song playback.

Leaving demo mode

Press the [Transpose] and [Reverb] buttons simultaneously to leave demo mode.

Connecting external amplifiers and other devices

If the KR111’s amplification system doesn’t deliver enough power for your application, you can take advantage of its Output jacks.

Sending audio to external equipment

Before connecting the KR111 to another device, turn off the power to both devices.

If you wish to amplify the KR111 through an external system, or record your music using a tape recorder, connect the KR111’s Output jacks to the AUX IN, LINE IN or CH IN jacks of the external (keyboard) amplifier, mixer or tape deck.

Stereo Stereo

r	R	L (Mono)	R	L (Mono)
		Input		Output

To the AUX IN/LINE IN jacks of the external

amplifier/mixer, etc.

Note: If you are connecting the KR111 to a device with a monaural input, use the L/Mono jack.

Note: For cassette decks or HiFi amplifiers, you need audio leads with mono jacks at one end and (usually) RCA/cinch jacks at the other.

After connecting the KR111 to the amplifier, etc., be sure to switch on the KR111 and the external device(s) in the following order:

•First turn on the power to the KR111.

•Then turn on the power to the mixing console, amp, etc. (in that order).

Receiving audio signals from external sources

You can connect the audio outputs of an external MIDI instrument, CD or cassette player, etc., to the INPUT jacks. That has the advantage that such signals can be amplified by the KR111 and are therefore also present in the headphones (if connected).

To connect an external signal source, follow the instructions above but be sure to connect the LINE OUT, etc., jacks of the external source to the KR111’s Input jacks.

StereoStereo

R L (Mono) R L (Mono)

InputOutput

From the LINE OUT, etc., jacks of the external

instrument, CD player, etc.

16