Roland R-05 warranty Using the Auto Rec Start Function

Recording

Using the Auto Rec Start Function

By using the Auto Rec Start function, you can have recording start automatically when a specified time has elapsed, or when the recording level exceeds a specified value.

1.Press [MENU] to access the “Menu” screen,

use [ ]/[ ] to select “Recorder Setup,” and then press [ ].

2.Use [ ]/[ ] to move the cursor to the

Auto Rec Start setting, and use [ ]/[ ] to specify the time after which recording will start or the level at which recording will start.

(Default in bold)

	Auto Rec Start is not used	OFF
		2sec
	Time until recording starts
		5sec
		10sec
Setting		Level1
		(-60dB)
	Level at which recording starts	Level2
		(-30dB)
		Level3
		(-20dB)

3.Press [MENU] twice to return to the main screen.

4.From the main screen, press [ ] so the REC indicator is blinking. The R-05 will enter recording-standby mode.

5.Press [ ] once again.

Recording will begin automatically when the specified time has elapsed or when the specified recording level is detected.

51