An Overview of the SP-606

Switching the Mode (Internal/External)

Internal

In this mode you can use the SP-606’s pads and knobs to control the SP-606 itself.

To select Internal mode, press [INT] so it’s lit.

External

In this mode you can use the SP-606’s pads and knobs to control the P606 application (an included sequencer for Windows) running on your USB-connected computer.

To select External mode, press [EXT] so it’s lit.

If you want to control both the SP-606 itself and the P606 application, press [INT] and [EXT] so both buttons are lighted.

What Is the Play Screen?

The “play screen” refers to the screen that appears when you perform the following steps.

1.Power up the SP-606 as described in “Turning the Power On/Off” (p. 21).2.Press [INT] so it’s lit.

At this time, [EXT] will be unlit.

3.Press [SONG] or [PTN].

If you press [SONG], the word “Song” will appear vertically at the left edge of the screen. If you press [PTN], the word “Pattern” will appear vertically at the left edge of the screen.

Canceling the Previous Operation (Undo/Redo)

 

 

 

 

 

 

 

fig.0G-6

 

 

 

 

Before Recording/Editing

You can cancel the editing or recording operation that you

 

 

 

 

 

 

 

performed most recently on a song or pattern.

 

 

 

 

 

 

 

Procedure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hold down [FUNC] and press [

 

] (Top).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording/Editing REDO UNDO

*You can execute Undo for Pattern (microscope edit, realtime recording, step recording) and Song (edit, recording) operations.

*The Redo function cancels the Undo, returning you to the state before

After Recording/Editing

executing Undo. After you’ve executed Undo, you can once again

hold down [FUNC] and press [] (Top) to execute Redo.

15