Roland SP-606 Moving Performance Data (MOVE), Erasing Performance Data (ERASE), Inserting Performance Data (CREATE), Use, Use

Chapter 6. Pattern Editing

Inserting Performance Data (CREATE)

Here’s how to insert new performance data at the desired location in a pattern.

1.Press [F1] (CREATE) to get the CREATE EVENT screen.2.Specify the location at which you want to insert data.

(Example) 01-1-00: measure 1, beat 1, tick 00

Use [ ][ ] to move the cursor to “measure,” “beat,” and “tick,” and turn the VALUE dial or use [DEC][INC] to edit the values.

3.Press [F3] (EXEC) to insert the performance data.

If you decide to cancel, press [F2] (CANCEL).

4.Edit the parameters of the performance data you inserted.

Refer to “Basic Procedure for Microscope Editing” (p. 59).

Erasing Performance Data (ERASE)

Here’s how to erase performance data from a specific location.

1.Use [ ][ ] to move the cursor to the location of the performance data you want to erase.

2.Press [F2] (ERASE) to erase that performance data.Moving Performance Data (MOVE)

Here’s how to move performance data to another location.

1.Use [ ][ ] to move the cursor to the location of the performance data you want to move.

2.Press [F3] (MOVE) to get the MOVE EVENT screen.3.Specify the location to which you want to move the data.

(Example) 01-1-00: measure 1, beat 1, tick 00

Use [ ][ ] to move the cursor to “measure,” “beat,” and “tick,” and turn the VALUE dial or use [DEC][INC] to edit the values.

4.Press [F3] (EXEC) to move the performance data.

If you decide to cancel, press [F2] (CANCEL).

60