Roland SP-606 V-LINKSetup Parameters, Appendix, Controllable V-LINKFunctions and MIDI Messages, OFF, VFX1, VFX2, VFX3, VFX4, Value, T BAR, COLOR Cb, COLOR Cr, Parameter

Chapter 10. About V-LINK

V-LINK Setup Parameters

1.Use [ ][ ] to choose the setting (parameter) you want to edit.2.Turn the VALUE dial or use [DEC][INC] to edit the value of the parameter.

Parameter	Value	Explanation
V-LINK Ctrl Ch	1–16	Specifies the MIDI channel used to control V-LINK functions.
CTRL1	OFF,	Assign V-LINK functions to the control knobs and D Beam controller.
CTRL2	PLAY SPEED,	OFF: No V-LINK function is assigned.
CTRL3	DISSOLVE TM,	PLAY SPEED: Playback speed
D Beam	T BAR,	DISSOLVE TM: Dissolve time (the time over which images will
	COLOR Cb,	change)
	COLOR Cr,	T BAR: T bar
	BRIGHTNESS,	COLOR Cb: Color Cb (color difference signal)
	VFX1,	COLOR Cr: Color Cr (color difference signal)
	VFX2,	BRIGHTNESS: Brightness
	VFX3,	VFX1: Visual effect 1
	VFX4,	VFX2: Visual effect 2
	OUT FADER	VFX3: Visual effect 3
		VFX4: Visual effect 4
		OUT FADER: Output fader
Seq Ctrl Bank	OFF, 1–32	Of the pad settings included in the pattern data, only the pads of the
		specified pad bank will be assigned to V-LINK functions.

3.When you have finished setting the parameters, press [F3] (WRITE) to store the settings.

A message of “System Write, Are You Sure?” will appear. Press [F3] (EXEC) if you want to store the settings, or press [F2] (CANCEL) if you decide to cancel.

Appendix

Controllable V-LINK Functions and MIDI Messages

V-LINK function	Transmitted MIDI message	Controller
Clip/Photo 1–16	PC	Pad
Palette/Page 1–32	CC#0 (Bank Select)
Playback Speed	CC#8 (Balance)	CTRL1
Dissolve Time	CC#73 (Attack)	CTRL2
		CTRL3
T Bar	CC#11 (Expression)
		D Beam
Color Cb	CC#1 (Modulation)
Color Cr	CC#71 (Resonace)
Brightness	CC#74 (Cutoff)
VFX1	CC#72 (Release)
VFX2	CC#91 (Reverb)
VFX3	CC#92 (Tremolo)
VFX4	CC#93 (Chorus)
Output Fade	CC#10 (Panpot)

76