Roland SP-606 List of Effects, Editing the Mastering Setup, MFX, LOW, CTRL, CTRL, CTRL, RESO, HIGH, Value, DRIVE, CUTOFF, REPEAT, INTENS, MIDDLE, HF DAMP, E.LEVEL, 3 DELAY

Chapter 2. Using Effects

6.Press [F3] (SELECT) or [ENTER] to confirm your choice.

You will return to the MASTERING screen. If you decide to cancel, press [EXIT].

Editing the Mastering Setup

7.Use [ ][ ] to select the parameter you want to edit.

Turn the VALUE dial or use [DEC][INC] to edit the parameter value.

Parameter	Value	Explanation
Spilt Freq	200–8000Hz	Frequency at which the High and Low ranges are divided
In Level	-24–0dB	Mastering input volume
Low Attack	0.05–50ms	Time over which compression is applied to the volume after the input exceeds the
		Low Threshold
Low Release	0.05–2000ms	Time over which compression is released after the input falls below the Low
		Threshold
Low Threshold	0–127	Volume level at which compression begins to be applied to the low frequency
		range
Low Ratio	1:1–inf:1	Compression ratio for the low frequency range (inf: infinite)
Low Level	-24–+24dB	Output volume of the low frequency compressor
High Attack	0.05–50ms	Time over which compression is applied to the volume after the input exceeds the
		High Threshold
High Release	0.05–2000ms	Time over which compression is released after the input falls below the High
		Threshold
High Threshold	0–127	Volume level at which compression begins to be applied to the high frequency
		range
High Ratio	1:1–inf:1	Compression ratio for the high frequency range (inf: infinite)
High Level	-24–+24dB	Output volume of the high frequency compressor

8.If you want to save your settings, press [F3] (WRITE) to save them to “1 USER SET.”

9.The display will ask “System Write, Are You Sure?” To save your settings, press [F3] (EXEC) or [ENTER].

If you decide not to save your settings, press [F2] (CANCEL) or [EXIT].

List of Effects

MFX	CTRL 1	CTRL 2	CTRL 3
1 FILTER + DRIVE	CUTOFF	RESO	DRIVE
This is a low pass filter with	Adjusts the frequency at which	Adjusts the amount of peak	Adds distortion.
overdrive. It cuts the high-fre-	the sound will be cut.	(boost) applied to the region of
quency range and adds distor-		the cutoff frequency.
tion.
2 REVERB	REV TIME	HF DAMP	E.LEVEL
This is a reverb that cuts the re-	Adjusts the length of the rever-	Adjusts the frequency at which	Adjusts the volume of the re-
verb sound midway through	beration.	the high-frequency portion of	verb sound.
its decay.		the reverb is cut.
3 DELAY	DLY TIME	FEEDBACK	E.LEVEL
This is a stereo delay	Adjusts the delay length (*2)	Adjusts the proportion of the	Adjusts the volume of the de-
		delayed sound that will be re-	lay sound.
		turned to the input.
4 TAPE ECHO	REPEAT	INTENS	E.LEVEL
This simulates a classic tape-	Adjusts the tape speed.	Adjusts the number of echo re-	Adjusts the volume of the echo
type echo unit.		peats.	sound.
5 ISOLATOR	LOW	MIDDLE	HIGH
Isolates or eliminates the low,	Isolates/eliminates the low-	Isolates/eliminates the mid-	Isolates/eliminates the high-
mid, or high-frequency re-	frequency range.	frequency range.	frequency range.
gions.

35