Roland SP-606 Erasing Unwanted Performance Data, 7.Press [ ] (Stop) to stop recording, 3.Press [EXIT] to return to the REALTIME RECORDING screen

Chapter 5. Creating a Pattern

6.Press [F3] (START) or [] (Play) to begin REALTIME RECORDING.

If you specified a “Count In” (p. 54) of 1 MEAS or 2 MEAS, a count-in (unrecorded region) will be inserted. Realtime recording will begin after the count-in.

The screen will show the current measure and beat.

If you press [F2] (REHRSL), the screen will indicate “Rehearsal,” and you will be in Rehearsal mode; you will hear sound when you press a pad, but nothing will be recorded. Press [F2] (REHRSL) once again to exit Rehearsal mode.

If you want to select pads from a different pad bank, press [PAD BANK] and change the pad bank (p. 23).

A Start message from an external MIDI device can also be used to initiate recording.

If a Start message from an external MIDI device is used to initiate recording, a count-in will not be inserted.

If you send note messages from an external MIDI device to play samples, those note messages will also be recorded.

7.Press [ ] (Stop) to stop recording.

You will return to the Play screen.

You can execute Undo/Redo by holding down [FUNC] and pressing [ ] (Top) (p. 15).

Erasing Unwanted Performance Data

1.During realtime recording (i.e., in step 6 of “Realtime Recording,” p. 55), press [F1] (ERASE) to get the REALTIME ERASE screen.

2.Press [F2] (ERASE) or a pad to erase the unwanted performance data.

If you press [ERASE], all performance data during the time you hold down [ERASE] will be erased.

If you press a pad [1]–[16], the performance data of that pad will be erased during the time you hold down that pad.

3.Press [EXIT] to return to the REALTIME RECORDING screen.

55