Erasing a pattern
This function erases ONLY the performance data; other set-
tings (such as the number of measures and the time signa-
ture) stay the same.
fig.07-12e
Procedure
1. Press [PATTERN]-[F3 (EDIT)]-[F1 (ERASE)].
The “ERASE PATTERN” page will appear.
2. Use [CURSOR] to move the cursor to Pattern.
3. Use [INC/DEC] or the VALUE dial to select a pattern
number.
4. Use [CURSOR] to move the cursor to Part.
5. Use [INC/DEC] or the VALUE dial to select the part that
you wish to erase.
6. Press [F4 (ERASE)]
A confirmation display will appear.
7. Press [F4 (EXEC)] and the data will be erased from the
selected pattern. (Press [F1(CANCEL)] to return to the
previous page without executing the operation.)
Erasing selected measures of apattern
Performance data can be erased from specified measures of a
part or pattern. The erased portion will become blank mea-
sures allowing you to re-record in the same area
fig.07-13e
Procedure
1. Press [PATTERN]-[F3 (EDIT)]-[F1 (ERASE)]-[F3 (MEAS)].
The “ERASE PATTERN MEASURE” page will appear.
2. Select the portion you wish to erase. Use [CURSOR] to
move the cursor to the various settings.
From the left, the display indicates the pattern, part, first
measure, and last measure.
3. Use [INC/DEC] or the VALUE dial to make the setting.
4. Press [F4 (ERASE)]
A confirmation display will appear.
5. Press [F4 (EXEC)] and the data will be erased from the
specified area (Press [F1 (CANCEL)] to return to the pre-
vious page without executing the operation.)
Copying a pattern
fig.07-14
Procedure
1. Press [PATTERN]-[F3 (EDIT)]-[F2 (COPY)].
The “COPY PATTERN” page will appear.
2. Use [CURSOR] to move the cursor to Src.
3. Use [INC/DEC] or the VALUE dial to select the copy
source pattern.
4. Use [CURSOR] to move the cursor to Dst.
5. Use [INC/DEC] or the VALUE dial to select the copy des-
tination pattern.
6. Press [F4 (COPY)]
A confirmation display will appear.
7. Press [F4 (EXEC)] and the selected pattern will be
copied. (If you press [F1(CANCEL)], you will return to the
previous page without executing the operation.
123456
123456
Blank measures
123456
123456
Blank measures
123456
123456
Src
Dst
Chapter 6. Sequencer
104