Editing hi-hat, cymbalsand percussion
Only pitch and decay can be edited for instruments that are
assigned to trigger inputs 7–12. Even for trigger inputs 1-6,
only pitch and decay can be edited if the assigned instru-
ment is not V-EDIT capable.
fig.04-14
Procedure
1. Press [INST].
The “INST” page will appear.
2. Strike a pad connected to a TRIGGER INPUT jack 712.
The setting page for the pad you struck will appear.
3. Use [INC/DEC] or the VALUE dial to select a hi-hat, cym-
bal or percussion instrument.
4. Press [F2 (EDIT)].
The setting page for the selected instrument will appear.
5. Use [CURSOR] to move the cursor to the parameter that
you wish to set.
6. Use [INC/DEC] or the VALUE dial to make the setting.
Parameters
Pich: -480+480
Adjusts the pitch of the sound.
Decay: -31+31
Adjusts the decay time of the sound.
* For some instruments, raising/lowering the value beyond a cer-
tain level will not produce any further change in Decay.
Chapter 3. Instrument settings
86