Loading data from amemory card
Data saved on a memory card can be loaded into the TD-10.
Procedure
1. Press [SETUP]-[F4 (UTIL)]-[F2 (LOAD)].
The “LOAD from CARD” page will appear.
2. Insert the memory card into the MEMORY CARD slot.
3. Press [F4 (LOAD)].
A confirmation display will appear.
4. Press [F4 (EXEC)]and the data will be loaded from the
memory card. (Press [F1 (CANCEL)] to return to the pre-
vious page without excecuting the operation.)
* You can also load individual kits from a memory card. To do so,
use the Copy function (p. 117).
Automatically switchingthe display (Note Chase)
When editing sounds, the TD-10’s display will switch corre-
sponding to the sound that is used when a pad is hit (or
when a MIDI message is received). This function is called
Note Chase.
Note Chase will always be ON for notes that are struck on a
pad. This function can be turned off for notes received from
MIDI IN.
Procedure
1. Press [SETUP]-[F2 (MIDI)]-[F1 (GLOBAL)].
The “MIDI GLOBAL” page will appear.
2. Use [CURSOR] to move the cursor to Note Chase.
3. Use [INC/DEC] or the VALUE dial to turn the setting
on/off.
* Note Chase will NOT function while the INTERNAL sequencer
is playing.
Chapter 7. Settings for the entire TD-10
115
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10